Blonder Tongue – MIBT-S3A-810 – Fiber Optic Transmitter, Single-mode, DFB laser 110 Ch., 45-860 MHz, 1310 nm, +10 dBm Output, FC/APC Connector

  • 45-860 MHz Bandwidth
  • 1310 nm, Single Mode With FC/APC Connector Standard, (SC/APC Optional)
  • Available in 5 Optical Output Powers (6,8,10,12 and 14 dBm) To Handle A Variety of Applications
  • LED’s for Quick Assessment of RF Input, Laser and Cooler Status
  • Status/Alarm Jack on Rear Panel for Monitoring 5 Key Parameters
SKU: MIBT-S3A-810 Categories: , , Tag:

Description

The FIBT-S3A and MIBT-S3A Series of transmitters provides a robust system for transferring broadband CATV signals over single mode optical fibers. Both series have a a frequency bandwidth of 45- 860 MHz that accommodates a variety of different modulation formats such as AM/VSB, 8VSB, QAM, QPSK, etc. FIBT/MIBT-S3A series transmitters use high-power, low noise 1310 nm distributed feedback (DFB) laser diodes. An optical isolator protects the laser from optical reflections in the transmission path. This ensures high CNR, excellent linearity and consistent link performance. The FIBT transmitters are EIA 19″ wide rack mountable with a height of 1.75″. The MIBT transmitters utilize the MIRC-12V rack chassis and MIPS-12C power supply for mounting. Each MIBT-S3A occupies 2 slots within the MIRC chassis, therefore up to six (6) MIBT-S3A transmitters can be installed in 2 RU’s. Both the FIBT and the MIBT’s use efficient switching power supplies that accept utility power from 90 to 260 VAC and 50 to 60 Hz.

Open Spec Sheet

Related Products