Bondo Traffic Loop Sealant

Bondo Traffic Loop Sealant has been discontinued. Please see Durant STAT-A-FLEX® Traffic Loop Sealant as an excellent alternative.

• Durable, permanently elastic to saw cut openings and to hole sensitized wire loops for control traffic signals, parking lot  gates, traffic counters, etc.
• Rapid curing to minimize length of time a lane must be closed
• Cures chemically, assuring maximum protection of loop wires
• Excellent adhesion to cement and cured asphalt concrete
• Withstands the corrosive effects of road salts, auto fluids, jet fuel and gasoline, etc. unaffected by freeze thaw cycles
• Pourable, self leveling, assures total encapsulation of detector loop wires
• Will not harm the insulation on electrical cables
• Adjustable cure time depending on amount of catalyst use
• Shelf life of 12 months when stored at recommended temperature

SKU: P-606 Categories: ,

Description

Bondo Traffic Loop Sealant has been discontinued. Please see Durant STAT-A-FLEX® Traffic Loop Sealant as an excellent alternative.

Bondo Traffic Detector Wire Loop Sealant is a polyester compound supplied in homogenized, ready to use consistency, has excellent adhesion properties to cement and cured asphalt concrete. MEKP Liquid Hardener is used as a curing agent. The proportion of hardener to sealant is not critical in obtaining a complete cure. Quantity of hardener can be reduced for slower curing during warm temps (above 95°F), or increased for faster cure during cold temps (below 50°F).

Physical Property (typical) Bondo STAT-A-FLEX®
Weight/gallon 11.15 lbs 10.5 lbs
Cure Time (@77°F / mins) 35-45 45-60
Gel Time (@77°F / mins) 9-15 10-20
Elongation 18% 18%
Adhesion – Steel 800 ±100psi 800 ±100psi
Adhesion – Portland Cement 300 psi 300 psi
Absorption – Water 0.2% 0.2%
Absorption – Gasoline 0.2% 0.04%
Absorption – Oil 0.22% 0.02%

 

Open Spec Sheet

Open Material Safety and Data Sheet P606V

Open Material Safety and Data Sheet P606

You may also like…