Pencell – DT-1324 – 13″x24″x15″ Buried Cable Enclosure, DT Series

  • LID – Heavy Duty where it has to be. Made from Polymer Concrete.
  • BOX – Strong at nearly half the weight. Made from High Density Polyethylene.
  • Money Saver – Because the box is so light, less manpower and heavy lifting equipment is needed.
  • FINS – For strength and locking the box into place. Straight and flared walls move. Finned walls, no more shifting and sliding.
  • Pencell’s Heavy Duty Pull Boxes have the strongest strength-to-weight ratio in the industry and feature several cable pulling, strength and racking options.
SKU: DT-1324 Categories: ,

Description

Performance

PenCell products are designed and tested for compliance with Western Underground Committee Guide 3.6, TelcordiaGR-902 and GR-13, and ANSI/SCTE 77-2007 which is referenced in the National Electric Code (N.E.C.) section 314.30 as the requirement for enclosure integrity.

All PenCell products have met the acceptance of the (USDA) United States Department of Agriculture, Rural Utility Service (RUS), and are listed with this organization.

Many DOT agencies have PenCell enclosures on their Accepted Products List (APL).

To meet the acceptance criteria of these agencies, underground enclosures must successfully pass numerous material and product performance tests.

Material Information

High Density Polyethylene (HDPE) is used in both structural foam injection molded and rotation molded products. Lids made from this material are rated up to 5,000 lbs. Steel lids are available on some products and are rated up to 10,000 lbs. Polymer concrete is used for lids that are rated from 10-20,000 lbs.

Testing on PenCell products is conducted by third party independent testing labs; Under observation of a private third party licensed P.E. (Professional Engineer) and at Pencell’s Certified Testing Lab by qualified Engineering and Quality Assurance personnel. All test results are documented in accordance with ISO 9001-2008 Quality Management System standards.

PenCell Products are not intended for use in a direct roadway application.

Products should be selected based on the application criteria of each project. If particular TIER or Load ratings are called out for your project, we will be happy to discuss your projects needs. This can help determine which product best fits your application requirements.

This Pencell Pull Box also comes in size 24″ x 36″

Open Spec Sheet