Description
The Condux Winch Line Blower is a tool for installing winch line, rope, or pull tape into the conduit. It turns the job of placing winch line into one easy step, eliminating the need to blow a string and pull back a rope.
Using compressed air, 90 psi (6.2 bar) and 100 cfm (2.8 cmm), the winch line blower can propel steel winch line, rope, or tape into conduit from 1″ to 6″ in diameter. Installation is easy. No special tools are required.
The Condux Winch Line Blower consists of a variety of components:
Below is a sample list of products that are used with the Condux Winch Line Blower:
| Part# | Winch Line Body |
| 08201080 | Winch Line Body Assembly – 2″ – 6″ (body includes 1⁄2″ – 9⁄16″ Venturi set) |
| Part# | Adapters – Available in .75″ to 6″ mostly in 1/2″ increments |
| 08201020 | 2″ Split Threaded Adapter – 1.91″ – 2.10″ (49 mm – 53 mm) |
| 08201030 | 3″ Split Threaded Adapter – 2.83″ – 3.10″ (72 mm – 78 mm) |
| 08201041 | 4″ Split Threaded Adapter – 3.80″ -4.06″ (97 mm – 103 mm) |
| Part# | Carriers – Available in 2″ to 6″ mostly in 1/2″ increments, various schedule types |
| 08202020 | Carrier, Winch Line 2″ SCH40 & 80, TC6, Carrier OD 2.05″ (53 mm) |
| 08203920 | Carrier, Winch Line 4″ SCH40 & 80, TEL, Carrier OD 4.25″ (108 mm) |
| 08205920 | Carrier, Winch Line 6″ SCH 40 & 80, Carrier OD 6.25″ (159 mm) |
| Part# | Hose & Valve |
| 08201015 | Hose Valve Assembly |
| Part# | Venturi Sets |
| 08201089 | Venturi, Winch Line 1⁄4″ – 3⁄8″ set |
| 08201086 | Venturi, Winch Line 1⁄2″ – 9⁄16″ set, Comes standard with Winch Line Body |
| 08201090 | Venturi, Winch Line 7⁄8″ set |
See the Spec Sheet for a step-by-step guide to Winch Line & Rope Installation.