Description

The Model K pull type Lasher handles just about any size lashing job. Use it to single- or double-lash a single cable up to 3 1/2″ outside diameter and multiple cables up to a combined outside diameter of 4 5/8″.

The rotating drum on the Model K makes one revolution every 13″. Load both payout reels to create a double lash with a support every 6 1/2″…… or load one payout reel for a single lash support every 13″. As with all DCD lashers the Model K operates without strand traction, even in bad weather. You control the tension of the lashing wire in the field by adjusting the tension rollers.

Use the Model K in wet weather or in tight places in trees. Front end ratchets prevent the lasher from backing up on the strand when forward pressure is released. Thanks to the wire friction drive feature of the Model K you may overlash existing cable without removing the old lashing wire. The Model K uses all types and sizes of lashing wire from .045″ to .091″. The 1AK metal reel and a cone shaped hub are optional features. The straight hub wire spool is standard.

The Special K Lasher handles the oversized lashing jo bs. Use it to single or double lash a single cable up to 5-1/4″ outside diameter and multiple cables with up to 5-3/4″ combined outside diameter.

The rotating drum of the Special K Model makes one revolution every 18″, double lashing with support every 9″. As with all DCD lashers, the Special K operates without traction from the strand to drive the lasher.

The Special K uses all types and sizes of lashing wire (from .045 to .091) without modification to the lasher. The lashing wire tension is fully adjustable on this lasher.