DZS – MXK-UPLINK-6X1GE-CLK – MXK Uplink Card, 6x1G Ethernet Ports

  • Aggregate 400 Gbps of non-blocking capacity, with 20 Gbps to each line card
  • Supports cross-card link aggregation
  • Support for carrier-class active/standby redundancy, link aggregation, point-to-point, and ring configuration on all ports
  • Copper and fiber based SFP
  • Full range of management options including SNMP, CLI, WebUI, and integration into DZS’s ZMS Element Management System
SKU: MXK-UPLINK-6X1GE-CLK Categories: , Tags: ,

Description

MXK uplink cards enable operators to offer superior high-bandwidth services in a variety of network designs by offering a wide range of available service types and features, and all models support both copper and fiber SFPs. The MXK-UPLINK-6X1GE-CLK supports 6 X 1G Ethernet ports with E1/T1/BITS timing inputs.

Additionally, MXK uplink cards provide full card and network redundancy by supporting an active card and backup standby in the same chassis. If a card or network failover occurs, the standby card will take over instantly – even without dropping any calls. And for additional network resiliency, these cards support both cross-card and intra-link aggregation, as well as the EAPS ring protocol.

MXK CHASSIS

The MXK family includes three fully-integrated form factors:

  • MXK-319 – 19″ Rack x 3RU, with 7 slots for line cards
  • MXK-819 – 19″ Rack x 8RU, with 14 slots for line cards
  • MXK-823 – 23″ Rack x 8RU, with 18 slots for line cards. The chassis support both front and rear power options and are equipped with a cable management tray, easy fan access, and redundant power feeds.

MXK UPLINK CARDS

MXK uplink cards offer a mix of multiple 10G and 1G interfaces to suit a variety of network designs. Several line rate configurations are currently available, including two different variants of 2x10G + 8x1G, as well as 6X1G. These cards provide connection points for common synchronization inputs including SyncE and 1588v2, as well as support for both copper and fiber SFPs, link aggregation, link redundancy, and the EAPS ring interface.

SLMS

DZS’ SLMS (Single Line Multi-Service) access operating system provides intelligent functionality across all the company’s hardware products. Driven by experience in commercial operation and collaboration with 700+ service providers worldwide, DZS’ SLMS delivers functionality critical to today’s access networks in advanced networking, quality of experience, voice, security, and management.

SECURITY

To maintain tight security in the last mile, the MXK platform mounts considerable defenses, powered by all of DZS’s SLMS security features, including multicast control lists, secure bridging, broadcast suppression, dynamic IP filtering, SSH and SFTP, and RADIUS authentication.

MANAGEMENT

The MXK product line integrates fully into the DZS Management System (ZMS). Using ZMS, thousands of MXK nodes can be managed from remote locations. Customer provisioning, auto discovery, alarm aggregation, and maintenance can easily be performed without any service interruption.

SMART OMCI

Unlike vendors who have dodged the complexity of the ITU’s G984.4 standard for GPON ONT management, DZS provides a simple and clean interface to a fully standards-compliant OMCI implementation. DZS’s Smart OMCI™ approach allows the MXK OLT to interoperate with any vendor’s ONT, yielding rapid ONT and service extension without OLT software upgrades. With Smart OMCI you can configure, obtain stats and support alarms on any ONT without hassle.

CABINETS

DZS offers a full line of outside cabinets engineered specifically to support MXK platforms. Multiple configurations are available for deployments from small to large scales, with a wide range of powering, protection, and line termination options.

Open Spec Sheet

Related Products