sku,post_status,post_title,post_content,post_excerpt,category,price,regular_price,stock_status,featured_image,comment_status,attributes,pa_manufacturer
EDPF-Series,publish,Eagle - EDPF Series - Diplex Filter,"Diplex filters are three port devices with a common port, a lowband port and a highband port. They are used to combine or isolate two different bands of
frequencies. Models are available in a wide variety of crossover frequencies. Eagle’s diplex filters are the sharpest available on the market.","Insertion Loss: -1.0 dB
Temperature Range: -400 F to +1400 F
Isolation: -50 dB min
Impedance: 75 Ohms, 50 Ohms
Connectors: “F” Type, SMA, N
Rack Mount up to 3 units or Wall Mount Versions Available",,0,0,instock,EDPF Series,closed,manufacturer->0,Eagle Comtronics
EZLP Series,publish,Eagle - EZLP Series - Point of Entry Filter,Home networking made EZ with the use of Eagle’s patented EZLP series filter for your next home networking installation. This low-pass point of entry filter is a must have for homes where MoCA technologies are being implemented. The POE filter will enhance house to house MoCA signal isolation by physically isolating the home while blocking any unwanted interfering signals from neighboring homes. This dual function filter also acts as a reflector to minimize the loss of the MoCA signal within the home allowing subscribers the ultimate multi-room DVR experience.,"Designed to keep MoCA signals within the residence
Prevents interference between subscriber homes that deploy MoCA technologies
Acts as a reflector of the homes internal signals
One piece slim line metal work
Designed for EZ installation at POE
Pioneering Patent technology",,0,0,instock,EZLP Series,closed,manufacturer->0,Eagle Comtronics
ECB-X ,publish,Eagle - ECB-X - C-Band Intereference Filters,"Eagle Comtronics C-Band Interference Filters are designed for use in both single and multi-feed receive antenna applications. The units are easily installed between the C-Band feedhorn and the LNA or LNB. With the enhanced Bandpass filter, these filters offer the industry’s highest out-of-band interference suppression of cellular frequencies, commercial and military navigational communications (radar), as well as coastal / marine vessels operating below the C-Band. Typical suppression level of -45 dB is achieved at the lower and upper interfering frequencies, compared to the current industry level of 20 - 25 dB.","Low Insertion Loss
• Low Differential Group Delay
• High Interference Rejections
• Lightweight, Low Profile
• Waveguide body & flanges utilize a one piece construction.",,0,0,instock,ECB-A,closed,manufacturer->0,Eagle Comtronics
CBP-XX,publish,Eagle - CBP-XX - Channel Bandpass Filter,"Bandpass filters pass a specific band of frequencies
while attenuating below and above the passband","Typically used on the output of modulators or off
air antenna’s to help minimize spurious noise or
harmonics in the system.",,0,0,instock,CPB-XX,closed,manufacturer->0,Eagle Comtronics
CD-XX,publish,Eagle - CD-XX - Economical Channel Deletion Filter,Channel deletion filters are an economical way to attenuate an entire channel allowing the reinsertion of a new channel or data signal without interference from the original signal.,"Removal of a selected channel or frequency
Allow the reinsertion of a locally originated signal
Commercial Accounts, Schools, Hospitals, Hotels, Homeowners",,0,0,instock,CD-XX,closed,manufacturer->0,Eagle Comtronics
EBWD-XX,publish,Eagle - EBWD-XX - Eagle Brick Wall Deletion,"Removal of a selected channel or frequency to
allow the reinsertion of a locally originated signal.
Commercial Accounts, Schools, Hospitals, Hotels, Homeowners","Exceptional Low Insertion Loss
Extended High Frequency
Temperature / Frequency Stable
Passes Adjacent Channels
Rack Mount or Wall Mount Options
Connectors “F” Type
Power Passing Available",,0,0,instock,EBWD-XX,closed,manufacturer->0,Eagle Comtronics
EBWHP-XX,publish,Eagle - EBWHP-XX - Brick Wall Highpass,"Removal of a series of channels or frequencies to
allow the reinsertion of a locally originated signal.
Commercial Accounts, Schools, Hospitals, Hotels, Homeowners","Exceptional Low Insertion Loss
Temperature / Frequency Stable
Rack Mount or Wall Mount Options
Connectors “F” Type
Power Passing Available",,0,0,instock,EBWHP-XX,closed,manufacturer->0,Eagle Comtronics
EBWLP-XX,publish,Eagle - EBWLP-XX - Brick Wall Lowpass,"Removal of a series of channels or frequencies to
allow the reinsertion of a locally originated signal.
Commercial Accounts, Schools, Hospitals, Hotels, Homeowners","Exceptional Low Insertion Loss
Temperature / Frequency Stable
Rack Mount or Wall Mount Options
Connectors “F” Type
Power Passing Available",,0,0,instock,EBWLP-XX,closed,manufacturer->0,Eagle Comtronics
EFCC-XXX,publish,Eagle - EFCC-XXX - Filtered Channel Combiner,"The Eagle Filtered Channel Combiner is the premier forward spectrum combining network for today’s Telecommunications Industry. Eagle’s New Patent Pending passive combiner allows you to save up to -7dB of Insertion Loss in the headend over traditional splitter combining methods. Each input channel is routed through an individual bandpass filter. The filter removes out-of-band noise and spurious signals
produced by the modulator and provides a high degree of isolation between modulators. This extensive filtering allows the combining of analog channels and digital carriers from many different sources onto a single output cable with reduced insertion loss and improved carrier to noise and MER. The EFCC is simply the best channel combiner available in the industry today. Let the New Eagle Filtered Channel Combiner help improve your total performance throughout the distribution system.","• Low Insertion Loss •Improve C/N and MER
• Easy Channel Identification
• Removes Modulators Spurious Outputs and Harmonics",,0,0,instock,EFCC-XXX,closed,manufacturer->0,Eagle Comtronics
EHLF,publish,Eagle - EHLF - Hardline/Power Passing Enclosure,"Operators can install the EHLF in their distribution plant which will allow them to supply a
selective frequency band to commercial buildings, hotel/motels and MDU’s. When a
highpass or bandstop filter is incorporated in the EHLF, you now have the capability to
isolate areas from ingress. The EHLF can be used for technical training purposes
when you need to simulate cable loss by placing a cable simulator in the EHLF.
No need to use expensive reels of cable.","EHLF Hardline enclosures allow many of Eagle’s cylindrical products as well
as custom products to become AC power passing when placed in the EHLF.",,0,0,instock,EHLF,closed,manufacturer->0,Eagle Comtronics
EQNF-XX,publish,Eagle - EQNF-XX - QAM Notch Filter,"The “QAM Notch Filter” is a very narrow notch network utilizing the
“phase cancellation” technique pioneered by Eagle Comtronics Inc.
This filter disrupts the ability of a receiver to tune a QAM carrier.",To secure the reception of any QAM carrier where unauthorized reception may be occuring.,,0,0,instock,EQNF-XX,closed,manufacturer->0,Eagle Comtronics
ESDPF-XX,publish,Eagle - ESDPF-XX - Miniature Diplex Filter,"Diplex filters are three port devices with a common port, a lowband port and a highband port. They are used to combine or isolate two different bands of frequencies. Models are available in a wide variety of crossover frequencies. Eagle’s diplex filters are the sharpest available on the market.","•Insertion Loss: -1.0 dB
•Temperature Range: -400 F to +1400 F
•Isolation: -50 dB Typ
•Impedance: 75 Ohms
•Connectors: “F” Type",,0,0,instock,ESDPF-XX,closed,manufacturer->0,Eagle Comtronics
EZAP-XX,publish,Eagle - EZAP-XX - DC Blocking Attenuator Pads,"Reduces RF signal strength across the full range
by a set amount - Blocks DC Power - One Piece Design.","•Attenuator Value: -3dB, -6dB, -10dB, -20dB
•Frequency Range: 5 - 1000 MHz
•Return Loss: -20 dB typ.
•Impedance: 75 Ohms
•Attenuation Flatness: + 0.4dB (-3, -6, -10 dB)
                                             + 0.75db (-20 dB)",,0,0,instock,EZAP-XX,closed,manufacturer->0,Eagle Comtronics
EZHP,publish,Eagle - EZHP - Return Path High Pass Filters,"A high pass filter attenuates ingress and noise in the sub-low portion of the cable network. Placed on a non-active return at the subscriber’s drop, high pass filters effectively eliminate the major source of ingress in a HFC system, the customer’s home, which is unmanageable. Realizing the fact that many
installation locations are available, side of the house, tap ports, lock boxes and pedestals, Eagle Comtronics offers solutions to fulfill all your installation needs. Special low frequency models are available to block low frequency noise, commonly found in the 5-12 MHz band, while still passing the majority of the return band. This enables siginificant noise reduction while maintaining DOCSIS compliance.","The EZHP high pass filter
features a reduced diameter that
easily fits inside congested security boxes
and between tightly spaced tap ports, providing easier
mounting on ground/splitter installations at the subscribers premise.
Measures 1.825”.",,0,0,instock,EZHP,closed,manufacturer->0,Eagle Comtronics
EMWHP,publish,Eagle - EMWHP - Return Path Window Filter,"A window filter attenuates ingress and noise in the sub-low portion of the cable network. It is similar to a high-pass filter, with the added feature of a
bandpass, which permits a return signal to pass from the subscriber to the cable operator. This allows the cable operator to offer digital set tops, modems, and telephony along with an excellent method of ingress suppression. Continuing to realize that many installation locations are available, side of the house, tap ports, lock boxes and pedestals, Eagle Comtronics offers solutions to fulfill all your installation needs.","Only 1.965” in total
length for easier installation
in small lockboxes, narrow
pedestals and distribution panels.",,0,0,instock,EMWHP,closed,manufacturer->0,Eagle Comtronics
EZWPH,publish,Eagle - EZWPH - Return Path Windor Filter,"A window filter attenuates ingress and noise in the sub-low portion of the cable network. It is similar to a high-pass filter, with the added feature of a
bandpass, which permits a return signal to pass from the subscriber to the cable operator. This allows the cable operator to offer digital set tops, modems, and telephony along with an excellent method of ingress suppression. Continuing to realize that many installation locations are available, side of the house, tap ports, lock boxes and pedestals, Eagle Comtronics offers solutions to fulfill all your installation needs.","The EZWHP features a
reduced diameter that easily
fits inside congested security boxes
and between tightly spaced tap ports,
providing easier mounting on ground/splitter
installations at the subscribers premise. Measures 1.825”.",,0,0,instock,EXWMP,closed,manufacturer->0,Eagle Comtronics
EZPB,publish,Eagle - EZPB - Power Blocker,"Blocks coaxial center conductor voltages.
Reduces the risk of test equipment damages due to
stray voltages during measurements.
One Piece Weather Resistant Design","Frequency Range: 5 MHz - 1000 MHz
Insertion Loss: 0.5 dB Max.
Return Loss: 18 dB Min.
VDC Max: 250
VAC Max: 175
Impedance: 75 Ohms",,0,0,instock,EZPB,closed,manufacturer->0,Eagle Comtronics
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,• Low Insertion Loss INSERTION LOSS ANY INPUT TO THE COMBINED OUTPUT • Improve C/N and MER,,,,,,,,,,
,,"Channels 2 - 36, Channels 95 - 99 ............................ -14.50 dB Typ. • Easy Channel Identification",,,,,,,,,,
,,"Channels 37 - 78, ...................................................... -16.80 dB Typ. • Each Carrier Individually Bandpassed",,,,,,,,,,
,,"Channels 79 - 125, .................................................... -18.50 dB Typ. • Removes Modulators Spurious Outputs and Harmonics",,,,,,,,,,